Tree·Oss® Prosthetic System
The Tree·Oss® Prosthetic System offers a wide range of possibilities in prosthetic components, thus assuring reliable and long lasting solutions for every clinical situation while satisfying the present esthetic demands.
Its wide variety of components allows for restorations using any prosthetic technique: cemented and/or screw retained single units, multiple units restorations at implant level or using transmucosal systems, overdentures and even metal free restorations using Zirconia abutments.
The Tree·Oss® System is mainly focused on three types of connections:
Unified internal Hexed connection. Simplifies prosthetic procedures using just one connection.
Conical Settling. Perfect sealing; maximum reduction of micro-movements.
Platform Shift. Promotes soft tissue and cervical bone conservation, thus achieving esthetic and biologically stable restorations.
Tri-channel Internal Connection. Reduces screw loosening and simplifies clinical procedures.
4mm Deep. Higher resistance to lateral charges.
Color Coded. Simplifies interaction with prosthetic components.
Hexed External Connection. The simplicity of standard.
Compatible. Branemark compatible hex on all of the 3 dimensions for universal restorations.
Reduced height. Makes procedureseasier in treatments with multiple screw-retained prosthetics and overdentures.
The Tri-channel internal connection of the Tree·Oss® HS and Tree·Oss® ANATÓMICO Conexión Interna are compatible, and the External Hex connections of Tree·Oss® RAPID and Tree·Oss® ANATÓMICO Conexión Externa have the same prosthetic platform, thus making the final restoration extremely simple.
All the prosthetic alternatives are available for both connection systems.
Implant Analog
Made of Titanium.
Color coded.
Transfer
Made of titanium.
Color coded.
Multiple and single unit impressions.
Hexed connection 0,050.
SNAP transfer system
Plastic coping to be used together with any Tree·Oss® implant mount.
Allows for closed tray impressions taken by dragging the SNAP, thus obtaining great precision impressions with a simple technique.
One coping for every Tree-Oss diameter and connections.
Procedure:
Place the implant mount corresponding to the implants placed that you wish o transfer to the model.
Seat the SNAP on the implant mount by pressing towards the implant.
Take one impression with closed tray and drag the SNAP.
Unscrew the implant mount and screw it on an analog
Reposition the implant mount together with the analog in the SNAP into the impression material.
Perform the corresponding emptying for the connection on the model.
Healing cap
Made of titanium.
Various emergency profiles.
Various heights.
Color coded.
Hexed connection 0,050.
Standard Straight Abutment
Made of titanium.
Single and multiple units cases with cemented prosthesis.
Use the engaging for single crowns and the non-engaging for multiple units cases.
Ideal for provisional restorations and immediate load.
Includes prosthetic screw with hexed connection 0,050.
Esthetic Abutment
Made of titanium.
Allow for carving.
Straight: extended wall height and thickness for versatile carving.
Angled: 15º angulation.
Esthetic shoulder design, lower on labial area.
Single unit cases with cemented prosthetics.
Ideal for esthetic areas.
Includes prosthetic screw with 0.050 hexed connection.
Zirconia Abutment
Made of Zirconia Yttria, highly strong ceramic material.
Allows for carving.
Optimal compatibility and esthetics.
Less bacterial load.
Cemented or screw-retained crowns.
Various shoulder heights available.
Includes prosthetic screw with 0,050 hexed connection.
Burn-out abutment (UCLA)
Machined on fully burn-out, residue-free material.
Single or multiple units cases with cemented or screw-retained prosthesis.
Overdentures.
Customized design when the implant orientation is not optimal.
Use the engaging for single unit cases and the non-engaging for multiple units cases.
Includes prosthetic screw with 0,050 hexed connection.
Burn-out abutment (UCLA) with metal base
Burn-out material with machined chrome base.
Single unit cases with cemented Crown.
Customized design when the implant orientation is not optimal.
Design a customized abutment without losing precision or adaptation at implant connection level.
Includes prosthetic screw with 0,050 hexed connection.
Ball-Attached Abutment
Made of titanium.
Overdentures with ball-attachment.
Metal o-ring system with high retention silicon.
Easy and economical solution. Various heights available.
Fix using the ball-attachment screwdriver.
Tornillos
Made of titanium.
Available in two connections: 0,050 hexed and square.
Transmucosal Prosthetic System – Multiple Abutment
The Multiple Abutment System allows restoring cases with multiple implants with great advantages on the prosthetic procedures as well as on functionality,
The use of Multiple Abutments makes it possible to correct differences in height and alignment between the different implants, by raising all the procedures over the gingival margin, thus reducing soft tissue retraction and protecting the implant osseointegration.
The Multiple Abutments assure a perfect implant-abutment adaptation and predictable biologic and biomechanical results for fixed screw retained prosthetics as well as for overdentures.
Advantages of the Multiple Abutments:
Perfect adaptation
The use of machined pieces together with the implants assures a perfect adaptation, thus avoiding screw loosening and protecting osseointegration as well as the soft tissue.
Healthy soft tissue
Once the Multiple Abutments are screwed to the implants, they should not be removed for any further procedure. This will allow for complete healing of the soft tissue thus avoiding gingival retraction.
Simple prosthetics
The various angulations and heights available make it possible to align all the implants, regardless of their position. This simplifies impression taking and the manufacture of passive structures with correct adaptation.
Optimal biologic and biomechanical result
The combination of machined adaptation to the implant, together with the rasing of all the procedures above the gingival margin will protect the osseointegration as well as the soft tissue.
The compensation of angulation and height differences between the implants will assure a well-adapted prosthetic structure that will guarantee long lasting functionality.
Straight Multiple Abutment
Made of Titanium
Various shoulder heights.
Screw-retained multiple prosthetics.
Overdentures.
Correct difference in height between implants.
Adjust using the Multiple Abutment screwdriver.
Angled Multiple Abutment
Made of Titanium.
17° or 30° angulation.
Multiple screw-retained prosthetics.
Overdentures.
Correct difference in height between implants.
Fix using the Multiple Abutment screwdriver.
Components for Multiple Abutment
Multiple Abutment
Analog
Made of titanium.
Replicates Implant + Multiple Abutment on the model.
Transfer for Multiple Abutment Open Tray
Made of titanium.
Take open tray impressions at abutment level by screwing them on the Multiple Abutments previously torqued to the implants.
Fix with 0.050 hexed screwdriver.
Transfer for Multiple Abutment Closed Tray
Made of titanium.
Take closed tray impressions at abutment level by screwing them on the Multiple Abutments previously torqued to the implants.
Manual fixation.
Protection cap for Multiple Abutment
Made of plastic, with titanium micro-screw.
Convert the Multiple Abutments into healing caps when not performing immediate load techniques and promote the final healing of the soft tissue.
Use them on Multiple Abutments which have been previously torqued to the implants.
Fix with 0.050 hexed screwdriver.
Temporary Titanium Abutment for Multiple Abutment
Standard titanium abutment to be placed on Multiple Abutments.
Allows for carving.
Includes grooves for acrylic retention.
The tapered design at connection level allows for misalignments of up to 40 degrees.
Use them to manufacture temporary acrylic prosthetics. Includes 0.050 hexed micro-screw.
Adjust at 15 Ncm2.
Burn-out abutment
for Multiple
Abutment
Standard titanium abutment to be placed on Multiple Abutments.
Allows for carving.
Includes grooves for acrylic retention.
The tapered design at connection level allows for misalignments of up to 40 degrees.
Use them to manufacture temporary acrylic prosthetics. Includes 0.050 hexed micro-screw.
Adjust at 15 Ncm2.
Metal based burn-out abutment for Multiple Abutment
Fully burn-out material with chrome base.
Design and produce customized structures for fixed prosthetics of overdentures without losing adaptation.
Reduces screw loosening.
Its conical design at connection level allows for misalignments of up to 40°.
Includes micro-screw with 0.050 hexed connection.
Fix at 15 Ncm2.
Micro-screw
for Multiple
Abutment
Titanium screw used to fix structures on Multiple Abutments.
0.050 hexed connection.
Maximum torque: 15 Ncm2.